2nd Edition
POWER TOOLS
CATALOGUE
April 2016
Hitachi Power Tools (UK) Ltd
Precedent Drive, Rooksley, Milton Keynes, Buckinghamshire MK13 8PJ
Sales Enquiries
Telephone: 01908 354700
Fax: 01908 232868
Email: sales@hitachi-powertools.co.uk
General Enquiries
Telephone: 01908 660663
Fax: 01908 606642
Email: info@hitachi-powertools.co.uk
Internet: www.hitachi-powertools.co.uk
www.hitachi-powertools.co.uk
facebook.com/HitachipowertoolsUK @HitachiToolsUK youtube.com/user/HitachipowertoolsUK google.com/+hitachipowertoolsuk
Your local dealer is:
Now includes
Outdoor Power Equipment
Manufacturing Bases
Sawa Plant (Japan) Hitachi Koki (Malaysia) Sdn. Bhd.
Main Products Main Products
Air Compressors, Nailers and Cordless Tools Rotary Hammers, Demolition Hammers and Disc Grinders
Hitachi Koki
Hitachi Group
Koki GroupOffers
Offers Guang Dong Hitachi Koki Co., Ltd. (China) Guangzhou Hitachi Koki Co., Ltd. (China)
Consistent Quality
Consistent Worldwide
Quality Worldwide
Main Products
Cordless Tools and Impact Drills
Main Products
Outdoor Power Equipment (Engine Products)
Established in Japan in 1948, Hitachi Koki Co, Ltd maintains its position as one of world’s leading power tool
Established in 1948 in Japan, Hitachi Koki Co., Ltd. maintains its position as one of world’ s leading power tool
manufacturers. The Hitachi Koki Group, including the Research and Development Division in Japan and its sales
manufacturers. The Hitachi Koki Group including the Research and Development Division in Japan and its sales
subsidiaries in more than 30 countries around the world, continues to contribute to society by offering innovative,
subsidiaries in more than 30 countries* around the world continues to be to contribute to society by offering innovative,
1
high performance and high quality products and services that provide a high level of customer satisfaction.
high-performance and high-quality products and services that result in a high level of customer satisfaction.
The Group strictly evaluates quality at each of the development, design and manufacturing stages and conducts
The Group strictly evaluates quality at each of the development, design and manufacturing stages and conducts a final
a final check of products from the customers’ perspective. Quality evaluation tests product performance,
check of products from the customers perspective. Quality evaluation tests product performance, functions and
functions and durability under various test conditions. In addition, for the accurate measurement of component
durability under various test conditions. In addition, for the accurate measurement of component dimensions, it adopted
dimensions, it has adopted the use of three dimensional digitizers in 2001. Utilising three dimensional data
the use of three-dimensional digitizers in 2001. Utilizing three-dimensional data prepared during the design phase, each
prepared during the design phase, each components’ complicated external dimensions can be measured with a
components complicated external dimensions can be measured with a high degree of precision in a short time. This Fujian Hitachi Koki Co., Ltd. (China) Hitachi Koki Taiwan Co., Ltd.
high degree of precision in a short time. This helps maintain quality and reduce development time.
helps maintain quality and reduce development time. Main Products Main Products
The Group has high
The Group has level production
high-level technologies
production for faster
technologies commercialisation
for faster of high
commercialization performance, highhigh-quality
of high-performance, quality Rotary Hammers, Drills and Circular Saws Nailers
products. These
products. include
These technologies
include forfor
technologies motor
motormanufacturing
manufacturingandand precision processingthat
precision processing thatsupport
support production
production of the
of thelatest
latestbrushless
brushless motors,
motors, rapid
rapid prototyping
prototyping with with the latest
the latest 3D printers,
3D printers, and facility
and facility automation
automation with intelligent
with intelligent robots. With
robots. With in-house
in-house developmentdevelopment
facilities thatfacilities
use these that use theseand
technologies technologies andworkforce,
a highly skilled a highly the
skilled workforce,
Hitachi thehas
Koki Group
Hitachi Koki Group
achieved a highlyhas achieved
efficient a highly
and flexible efficient
production and flexible
system. production
The Group system.
deploys these The Group
powerful deploys
production these at
technologies
powerful
its allproduction technologies
manufacturing at all toitssupport
bases worldwide manufacturing bases worldwide
its highly efficient, high-qualitytoproduction
support its high efficiency, high
activities.
quality production activities.
Contents
General Information
Index ......................................................... 2 Jigsaws..................................................... 61
Safety Information .................................... 3 Reciprocating Saws ................................. 62
Extended Warranty ................................... 4 Planers...................................................... 62
New Products ........................................... 5 Routers ..................................................... 63
Brushless Technology .............................. 6 Blower ...................................................... 63
AHB Technology ....................................... 8 Shear ........................................................ 64
UVP .......................................................... 8 Nibbler ...................................................... 64
6.0Ah Li-Ion Battery Technology .............. 9
Cordless Tools Nailers
Screwdrivers............................................. 12 Pneumatic Nailer ...................................... 64
Drill/Drivers ............................................... 12 Compresser .............................................. 64
Angle Drill ................................................. 13 Gas Nailers ............................................... 65
Automatic Screw Driver............................ 13
Combi Drills .............................................. 14 Cordless Outdoor Power Tools
Hammer Drills ........................................... 16 Grass Trimmers ........................................ 66
Impact Drivers .......................................... 18 36V Battery Pack ...................................... 67
Impact Wrenches ..................................... 19 Chainsaw .................................................. 67
Angle Grinders.......................................... 20 Hedge Trimmers ....................................... 67
Multi Tool .................................................. 22
Stud Cutters ............................................. 24 Petrol Outdoor Power Tools
Circular Saws ........................................... 24 Grass Trimmers ........................................ 68
Band Saw ................................................. 25 Brush Cutters ........................................... 69
Jigsaws..................................................... 25 Brush Cutter Heads & Blades .................. 70
Reciprocating Saws ................................. 26 Nylon Lines ............................................... 71
Planer ....................................................... 26 Hedge Trimmers ....................................... 72
Vacuum..................................................... 26 Chainsaws ................................................ 73
Radios ...................................................... 27 Chainsaw Bars & Chains .......................... 74
Fan............................................................ 28 Blowers..................................................... 75
Work Lights .............................................. 28 Augers ...................................................... 75
Lanterns ................................................... 28 Auger Accessories.................................... 76
Torchlights ................................................ 28 Lubricants................................................. 77
Chargers ................................................... 29 Canisters .................................................. 78
Batteries ................................................... 30 Chainsaw Boots ....................................... 79
Protective Headgear................................. 81
6.0Ah Cordless Kits .................................. 31 Protective Clothing ................................... 82
5.0Ah Cordless Kits .................................. 32 Eye Protection .......................................... 85
2.5Ah Cordless Kits .................................. 36 Hearing Protection ................................... 85
Breathing Protection................................. 85
Hitachi Stackable Case System ............... 38
Global Network......................................... 86
Mains Tools Table of Carbon Brushes .......................... 88
Rotary drills .............................................. 40
Angle Drill ................................................. 41
Impact Drills ............................................. 41
Rotary Hammer Drills ............................... 43
Demolition Hammers ................................ 46
Screwdrivers............................................. 48
Impact Wrenches ..................................... 49
Angle Grinder Kits .................................... 50
Angle Grinders.......................................... 52
Die Grinder ............................................... 55
Orbital Sanders ........................................ 56
Sander Polishers ...................................... 57
Belt Sanders ............................................. 57
Cut-Off Machine ....................................... 58
Disc Cutter ............................................... 58
Circular Saws ........................................... 59
Mitre Saws................................................ 60
Multi Tool .................................................. 61
Page 1
Index
Model Page Model Page Model Page Model Page
B D13 .......................... 41 H P
D13VF ...................... 40
BL36200 .................. 67 DA200E(SP) ............. 75 H45MRY .................. 46 P18DSL ................... 26
BSL1860 .................. 30 DA300E ................... 75 H60MC .................... 47 P20SA2.................... 62
DB3DL2 ................... 12 H65SD2 ................... 47 P20SF ...................... 62
C DB10DL ................... 12 H90SG ..................... 46
DH18DBL ................ 16 HSC1 ....................... 38 R
C7BU2 ..................... 59 DH18DSL................. 17 HSC2 ....................... 38
C7SB2 ..................... 59 DH24DVC ................ 17 HSC3 ....................... 38 R18DSL ................... 26
C7ST........................ 59 DH25DAL................. 17 HSC4 ....................... 38 RB24E ..................... 75
C7U2 ....................... 59 DH26PX ................... 44 RB24EAP ................. 75
C8FSE ..................... 60 DH28PC .................. 44 K RB40VA ................... 63
C9U2 ....................... 59 DH28PX ................... 44
C10FCE2 ................. 60 DH36DAL................. 17 KC10DFL2 ............... 12 S
C12RSH................... 60 DH38MS .................. 45 KC18DGL/JF ........... 36
C18DBAL................. 24 KC18DKL/JB ........... 32 SAT180 .................... 57
DH40MEY ................ 45 SAY150A ................. 57
C18DSL ................... 25 DH45ME .................. 43 KC18DPL/JA ........... 31
CB18DBL ................ 25 KC18DPL/JB ........... 31 SB8V2...................... 57
DH50MRY................ 45 SB10V2.................... 57
CC14SF ................... 58 DH52ME .................. 43 KTL218CV ............... 36
CE16SA ................... 64 KTL218DN/JF .......... 36 SP18VA.................... 57
DN18DSL................. 13 SV12SD ................... 56
CG22EAP2 .............. 68 DS10DFL2 ............... 12 KTL218WR/JJ ......... 32
CG27EA2 ................. 69 KTL318G/JF ............ 36 SV12SG ................... 56
DS18DBL ................. 13 SV13YA.................... 56
CG27EBDP .............. 68 DS18DSDL .............. 13 KTL318WG/JJ ......... 32
CG36DAL ................ 66 DV16V...................... 42 KTL318WH/JF ......... 36
CG36DL ................... 66 KTL318WR/JF ......... 36 U
DV18DBL ................. 14
CG40EJ(T) ............... 69 DV18DBXL............... 15 KTL418C/JJ............. 33 UB18DAL................. 28
CG47EJ(T) ............... 69 DV18DGL................. 14 KTL418CJ/JJ ........... 33 UB18DGL ................ 28
CG-GT ..................... 68 DV18DSDL .............. 14 KTL418CR/JJ .......... 33 UB18DJL ................. 28
CG-HT ..................... 68 DV18V...................... 42 KTL418DH/JJ .......... 32 UB18DSL................. 28
CG-MC .................... 68 DV20VB2 ................. 42 KTL418DS/JJ .......... 32 UC3SML .................. 29
CG-PE ..................... 68 DV20VD ................... 42 KTL418ELEC/JJ ...... 33 UC10SL2 ................. 29
CG-PS ..................... 68 KTL418G/JJ ............ 33 UC18YFSL............... 29
CH22EAP2 .............. 72 E KTL418P/JJ ............. 33 UC18YG .................. 29
CH22EBP2 .............. 72 KTL418WR/JJ ......... 32 UC18YKSL .............. 29
CH22ECP2 .............. 72 EC58 ........................ 64 KTL618BL................ 31 UC18YSL3 ............... 29
CH27EPA ................. 72 KTL618CV2/JJ3 ...... 35 UC24SGH ................ 29
CH36DL ................... 67 F KTL618CV/JJ3 ........ 34 UC36YRSL .............. 29
CJ18DSL ................. 25 KTL618DN2/JJ3 ...... 34 UF18DSAL ............... 28
CJ90VST ................. 61 FDV16VB2 ............... 41 KTL618S2/JJ3 ......... 34 UR10DL ................... 27
CJ110MV ................. 61 KTL618S6 ................ 31 UR18DSAL .............. 27
CJ160V .................... 61 G KTL618SD2/JJ3 ...... 34 UR18DSDL .............. 27
CL14DSL ................. 24 G10SR4 ................... 53 KTL618SJ2/JJ3 ....... 34
CL18DSL ................. 24 G12SE2 ................... 53 KTL618SJ6 .............. 31 W
CM12Y .................... 58 G12SN ..................... 53 KTL618SP2/JJ3 ...... 34
CM75EAP ................ 58 G12SR4 ................... 53 KTL918S6 ................ 31 W6VB3..................... 48
CN16SA ................... 64 G12SR4/CD ............. 50 KTL918S/JJ3 ........... 35 W8VB2..................... 48
CR10DL ................... 26 G12STX ................... 52 KTL2018/JJ4 ........... 35 WF18DSL ................ 13
CR13V2 ................... 62 G12STX/CD ............. 50 WH10DFL2 .............. 18
CR13VBY ................ 62 G13SC2 ................... 54 M WH18DBDL ............. 18
CR18DSL................. 26 G13SE2 ................... 54 WH18DGL ............... 18
CS33EB ................... 73 M6SB....................... 62 WH18DSDL ............. 18
G13YC2 ................... 54 M8V2 ....................... 63
CS33EDT ................. 73 G18DBAL ................ 20 WR16SE .................. 49
CS36DL ................... 67 M12V2 ..................... 63 WR18DBDL ............. 19
G18DSL ................... 20 M12VE ..................... 63
CS51EAP ................. 73 G18SE3 ................... 54 WR18DSDL ............. 19
CV18DBL ................. 22 G23MR .................... 55 WR18DSHL ............. 19
CV350V.................... 61 N WR22SE .................. 49
G23SC3 ................... 55
G23ST ..................... 54 NR90GC2 ................ 65 WR25SE .................. 49
D G23ST/CD ............... 50 NT50AE2 ................. 64
D6SH ....................... 40 G23ST/G12STX ....... 51 NT65GB ................... 65
D10VC2 ................... 40 G23ST/G12STX/CD. 51 NT65GS ................... 65
D10VF ...................... 40 G23UB2 ................... 55
D10YB ..................... 41 GP2S2 ..................... 55
Page 2
Safety
Double-Insulation power tool, indicated by the double square mark 3. Figures of battery capacity are nominal values.
( ), can be operated without external grounding. Every Hitachi 4. Standard accessories such as battery, charger, grinding wheel,
power tools are designed and manufactured considering safety sanding paper, blade, washer, collet chuck, chuck sleeve, side
and usability. Hitachi power tools are provided with various safety handle, dust collection adapter, protective items, wrench and
features like brakes, covers and clutches. carrying case, sometimes may vary from country to country. Some
of standard accessories may be excluded from country to country.
Power Input 5. Please state required voltage and specifications when you order.
Hitachi Power Tools employ series motors whose modern design is 6. Orders are subject to product-availability in each country.
based on Hitachi´s many years of experience. Unless otherwise 7. Some models in this catalog are shown with optional accessories
indicated in the catalogue, power input (Watt) is based on 110 to 240V. and fasteners such as screw, nail, bit, socket, blade, battery and
grinding wheel.
General Precautions 8. Actual colours of products may differ from those in printed photos
1. Read and follow handling instructions provided with the power tool of this catalog.
and comply with all the operating instructions and warnings.
2. Never let children use the power tool. Eco-Products
3. Keep others, especially children, away from the tool.
The Hitachi Group introduced the Assessment for Design for
4. Wear eye protector to protect the eyes.
Environment in designing and developing products to minimize
5. Never touch blades or cutters during operation.
the environmental impact at each stage of a product's lifecycle.
6. Avoid unintentional contact with the power switch when the tool is
Based on a result of the assessment of environmental design
connected to a power source.
compliance, Hitachi Koki designates those products surpassing
7. To ensure proper function of the tool, DO NOT remove installed
specific environmentally conscious criteria as Eco-Products,
covers or screws. DO NOT modify components and parts.
which are registered within the Hitachi Group. Eco-Products
8. Prior to operation, carefully inspect the tool to ensure all the parts
are introduced in our product catalogs along with Hitachi
properly functioning.
eco-product symbol, whose environmental information is
9. Immediately stop operation if abnormalities are noted.
disclosed on Hitachi Koki Co., Ltd. website.
10. Ensure that motor ventilation opening is kept fully open.
11. Always keep the blades and cutters sharp and clean.
12. Have the power tool inspected at a proper regular interval by an
authorized Service Center.
Icons
13. Maintain the proper care and cleanliness of the power tool. Battery Capacity
14. Consult an authorised Service Center for repair and/or part replacement. Double Insulation
& Recharging Time
15. DO NOT use the power tool for other application than those
specified in the handling instructions. Electronic Constant
Lithium-ion Battery
16. DO NOT use the tool for work beyond it´s prescribed capability. Speed Control
17. To avoid possible electric shock, DO NOT use the power tool in
wet areas. Electronic Soft
Brushless Motor
18. Ensure that the applied voltage is the same as that specified on Start Control
the nameplate.
19. Ensure that electric plug is plugged into a matching receptacle
Variable Speed Active Control System
that is properly installed and grounded in accordance with
instruction manual, all applicable local codes, and
ordinances, except for double insulated tools. 2-speed Gear
Aluminium
20. Ensure that the power supply is disconnected after operation. Housing Body
21. DO NOT lift the power tool with the cord or remove the plug from
the receptacle by pulling the cord. Reversible User Vibration
22. Always handle the power tool with care. Protection
23. Proper posture is essential for safe operation.
24. Dress properly and work in proper clothing and shoes. Slip Clutch IP56
25. Always keep the work area in good order.
26. When not in use, store the power tool in a dry place.
27. DO NOT stare into LASER beam. Orbital Cutting Action White LED Lamp
Guarantee
Random Orbit Action SDS max Shank
The primary concern of Hitachi Koki is the convenience
and satisfaction of the customer. To this end, each Hitachi power
tool is carefully tested and inspected, and is guaranteed against Spindle Lock SDS-plus Shank
any defects in workmanship and materials. Defects in
workmanship and materials – not attributable to wear and tear,
overloading, abusive treatment, unauthorised modification or Electric Brake Hex Shank
careless handling — will be repaired or replaced without charge.
Shock-Absorbing 28mm (1-1/8)
Handle Type Hex Shank
Notes for the international catalog:
1. Hitachi Koki reserves the right to change specifications of parts Dust Extracting Type Spline Shank
and accessories of Hitachi power tools without notice.
2. Specifications, features, accessories and parts such as power input,
maximum torque, cutting capacity, length, weight brake, hook, spindle Deep Cut Eco-Products
thread, chuck, blade, bore and handle, may vary from country to country.
Page 3
The Hitachi Extended Warranty scheme includes cordless Hitachi Power Tools offer an extended warranty on all
and electric power tools outdoor power equipment when registered within 4
weeks of purchase.
You can register your electric power tools for an extra 2 years Simply visit www.hitachi-powertools.co.uk/opewarranty.
warranty in addition to the standard 12 months. html and complete the registration form supplied.
Mains power tools and cordless tool bodies are covered, as
well as 4.0Ah, 5.0Ah and 6.0Ah Li-Ion batteries. 1.5Ah, 2.5Ah, What does the extended warranty cover?
3.0Ah and batteries are not covered. We undertake to replace or repair any part found to be
Online registration is required within 4 weeks of purchase defective in material or workmanship, within 24 months
via the Hitachi Power Tools (UK) Ltd website. (15 months for Hire Fleets) of delivery to the original
purchaser.
What does the extended warranty cover?
We undertake to replace or repair any part found to be defec- What is not covered?
tive in material or workmanship, within 36 months of delivery Defects arising from neglect, misuse or accident, except
to the original purchaser. as provided by statute. Accessories and other consum-
able items are also excluded from this Guarantee.
What tools are not covered by the warranty?
This scheme is only available to new tools purchased and How do I get my tool repaired?
used in the UK. Contact your nearest Hitachi authorised service agent.
Petrol tools have a separate extended warranty. See website You can find this on our website or by calling us on
for details. 01908 660663. You will need to provide your proof of
Cordless gas nailers and pneumatic nailers are not eligible for purchase and warranty registration number to the service
the extended warranty. They are covered by the standard 12 agent.
month warranty. I have purchased a cordless outdoor power tool. Is
Fleet tools are not eligible for the extended warranty. These this covered under the warranty?
are covered by a 3 month warranty against manufacturing Li-Ion cordless outdoor power tools are covered by the 3
defects. year electric tools warranty.
What is not covered?
• Gas nailers and pneumatic nailers
• Chargers, accessories and other consumable items, NiCad
and NiMH batteries
• Li-Ion batteries with capacity of 1.5Ah, 2.5Ah & 3.0Ah
• Defects arising from neglect, misuse or accident, except as
provided by statute.
How do I get my tool repaired?
Contact your nearest Hitachi authorised service agent. You
can find this on our website or by calling us on 01908 660663.
You will need to provide your proof of purchase and warranty
registration number to the service agent.
Scan this barcode to Scan this barcode to
register your electric tool register your petrol tool
Page 4
New Tools
Angle Drill Brushless Combi Drill Circular Saw
DN18DSL DV18DBXL C18DBAL
P.13 P.15 P.24
Brushless Hammer Drill DAB/FM Site Radio FM Site Radio
DH18DBL UR18DSDL UR18DSAL
P.16 P.27 P.27
Angle Grinder Band Saw Charger with USB socket
G18DBAL DB18DBL UC18YSL3
P.20 P.25 P.29
Multi Tool Angle Grinder Angle Grinders
CV18DBL G12STX G10SR4/G12SR4
P.22 P.52 P.53
Multi Tool Jigsaw Impact Driver
CV350V CJ160V WR16SE
P.61 P.61 P.49
Rotary Hammer Drill Impact Driver Impact Drivers
DH45ME/DH52ME DV20VD WR22SE/WR25SE
P.43 P.42 P.49
Page 5
B U S H L E S S M T T L S
Brushless
The next generation motor developed from
user needs and Hitachi’s original technology
Brushless Motor Advantages
Large FETs + highly durable electronic circuit,
1. More Durability, Longer Motor Life
also improved dust and water resistance!
2. Maintenance-Free
No carbon brush replacement required
Significantly extended
product life cycle No coil and Conventional
commutator motor
No more troubles with armature burnout, no commutator
layer short or commutator wear.
3. Up to 50%
Reduced electrical loss due to brushless
Longer Runtime per Charge*1
DS18DSL
Brushed motor Approx. 105 pcs. Up to
DS18DBL
Brushless motor Approx. 160 pcs. 50 %
Longer!
*1
*1 A comparison of the model DS18DBL with BSL1830 (3.0Ah*2)
and the model DS18DSL with BSL1830 (3.0Ah*2).
Test conditions: Coach screws 6mm dia. x 75mm length, lauan with 4mm dia. pilot holes. *2 The figure of battery capacity is a nominal value.
AC
Rotary Hammer
DH40MEY
(corded)
Brushless
Motor Rotary Hammer
Tools DH45ME
Rotary Hammer
DH52ME
4. More compact,
More lightweight
Impact Wrench Impact Wrench Impact Wrench Multi Tool
WR16SE WR22SE WR25SE CV350V
5. Stable performance
even during voltage drop
6. Compatible with engine
generators through
inverter circuit
Page 6
DC
(Cordless)
18V Cordless
Driver Drill
DS18DBL
Combi Drill
DV18DBXL
Combi Drill
DV18DBL
Brushless
Motor
Tools
Impact Driver Impact Wrench SDS-Plus Hammer Drill
WH18DBDL WR18DBDL Angle Grinder DH18DBL
G18DBAL
Multi Tool Circular Saw Band Saw
CV18DBL C 18DBAL CB18DBL 36V Cordless
Blower
RB36DL
LONGER BATTERY LIFE HIGHER POWER TO WEIGHT
Up to 50% increased run RATIO
time per battery for more Up to 50% increased run
work with less downtime time per battery for more
work with less downtime
INCREASED DURABILITY INCREASED POWER &
Higher tool durability via PERFORMANCE
low friction motor, which Thanks to improved
produces less heat electrical efficiency and
power transfer
Page 7
Aluminium Housing Body (AHB) Construction
Aluminium die-cast body
Firmly holding the motor shaft
Plastic stator holder
Composing the internal
Motor double-insulation construction
Robust & Highly Durable
1 The internal double-insulation construction with an aluminium die-cast body and a plastic stator holder
Due to the internal double-insulation construction with a plastic stator
holder and an aluminium die-cast body which firmly holds the armature shaft,
the durability of the motor and the tool body has remarkably improved.
User Vibration Protection (UVP) System
Coil Spring
Weight
Reduced vibration
and improved operating efficiency
1 Hitachi’s original, spring-type dynamic 2 Vibration-absorbing handle for H 90SG Demlition Hammer
vibration absorber for DH40MEY Rotary Hammer
Handle damper
Movement of the weight Movement of the weight
Holder (B)
Vibration direction
of the main body
Vibration direction
of the main body
Coil Spring Coil Spring
Weight Weight
Holder (A)
Handle shaft
Reduces vibration from the main unit by means of four
handle dampers bent by the rotating holder(A).
Page 8
Lithium-ion Battery Technology
Newly designed, BSL 1460
high capacity
6.0Ah Lithium-ion batteries
*
BSL 1860
1 Up to 20% longer runtime
per charge at the same size and weight (compared to 5.0Ah * battery)
5.0Ah*
DV 18DBL
Up to
330 screws
REGARDING LITHIUM-ION BATTERY
396 screws
TRANSPORTATION
6.0Ah * Up to
DV 18DBL When transporting a lithium-ion battery,
*Wood screw 8 x 75mm, American pine (when in Low Mode.) please observe the following precautions.
WARNING
2 Fully compatible with all Hitachi Notify the transporting company that a package contains a
lithium-ion battery, inform the company of its power output
14.4V/18V cordless tools (slide type) and follow the instructions of the transportation company
when arranging transport.
at the same voltage
Lithium-ion batteries that exceed a power output of
100Wh are considered to be in the freight classification of
Long lifetime
Dangerous Goods and will require special application
3 procedures.
For transpor tation abroad, you must c omply with
Up to 1,500 cycles rechargeable through international law and the rules and regulations of the
Multiplex Protection Circuit that prevents destination country.
over-load, over-charge and over-discharge
Page 9
Page 10
Page 11
Cordless Screwdrivers
DB3DL2 3.6V Cordless Screwdriver Specifications:
Drive 6.35mm Hex Bit Shank
Capacity : Mild Steel 5mm
■ Convertible to use in angled or straight Wood Screw 3.8 x 38mm
(D x L)
■ Max lock torque: 5Nm (hard) Machine Screw 5mm
■ Spindle lock mechanism Battery Voltage 3.6V
■ Adjustable clutch: 21 stage torque No Load Speed :High 600/min
Low 200/min
■ Equipped with Battery Protection Circuit Torque Setting 0.3-2.9Nm
■ White LED light on body Max Torque (hard) 5Nm
Overall Length: Straight 268mm
Angled 210mm
Weight 0.45kg
Standard Accessories Driver bit, carrying case
Convertible to use in angled or straight
Variants
■ DB3DL2/JL = 2 x 1.5Ah Li-Ion batteries, UC3SFL
charger
DB10DL 10.8V Cordless Screwdriver Specifications:
Drive 6.35mm Hex Bit Shank
Capacity: Soft Wood 18mm
■ Max lock torque: 10Nm (hard) Wood Screw 6mm x 28mm
(D x L)
■ LED light Machine Screw 6mm
■ 6.35mm hexagon chuck Battery Voltage 10.8V
■ Adjustable clutch: 21 stage torque No Load Speed 0–400/min
Maximum Torque 10Nm (hard)
■ Compact and lightweight Torque Setting 1.0-6.0Nm
■ Soft grip handle Overall Length 147mm
■ Charge time 30 mins with UC10SL2 Weight 0.8kg
Standard Accessories Driver bit, carrying case
Variants
■ DB10DL/JL = 2 x 1.5Ah Li-Ion batteries, UC10SL2
charger
DS10DFL2 10.8V Cordless Drill/Driver Specifications:
Drill Chuck 0.8-10mm keyless
Capacity: Mild Steel 10mm
■ Fan-cooled motor and 2 speed gear Soft Wood 21mm
Wood Screw 5.8 x 45mm
■ 10mm keyless chuck (D x L)
■ Capacity for mild steel 10mm Machine Screw 6mm
■ Adjustable clutch: 21 stage torque Battery Voltage 10.8V
No Load Speed: High 0-1300/min
■ Slim and soft grip handle Low 0-300/min
■ LED light on body Max Torque Hard 27Nm
■ Charge time 30 mins with UC10SL2 Max Torque Soft 12Nm
Torque Setting 0.5-4.0Nm
Overall Length 188mm
Weight 1.0kg
Standard Accessories Driver bit, carrying case
Variants
■ DS10DFL2/JL = 2 x 1.5Ah Li-Ion batteries, UC10SL2
charger
KC10DFL2 10.8V Cordless Twin Pack Lightweight cordless kit including:
DS10DFL2 lightweight high spec drill/driver
WH10DFL2 lightweight high spec impact driver
2 x 1.5Ah Li-Ion batteries
UC10SL2 30 minute charger
All new stackable carrying case
Slim soft grip handle shape for comfortable use
Automatic trigger operated LED light
30 minute charge time
Stackable case
Page 12
Cordless Drill/Drivers & Angle Drill
DS18DSDL 18V Cordless Driver Drill Specifications:
Drill Chuck 1.5-13mm keyless
Capacity: Mild Steel 13mm
■ High torque design Soft Wood 65mm
Wood Screw 8 x 100mm
■ Durable aluminum cover (D x L)
■ Fan-cooled motor and 2 speed gear Machine Screw 6mm
■ 13mm keyless chuck Battery Voltage 18V
No Load Speed: High 0-1600/min
■ Adjustable clutch: 22 stage torque Low 0-350/min
■ Belt hook Max Torque Hard 92Nm
■ LED light on body Max Torque Soft 46Nm
Torque Setting 2-8Nm
■ Remaining battery indicator lamp Overall Length 228mm
Weight 2.1kg
Standard Accessories Side handle, Driver Bit, Battery Cover,
carrying case
Variants
■ DS18DSDL/JJ = 2 x 5.0Ah Li-Ion batteries,
UC18YRSL charger, case
■ DS18DSDL/JJ1 = 1 x 5.0Ah Li-Ion battery,
UC18YRSL charger, case
■ DS18DSDL/W4 = body only
DS18DBL 18V Cordless Driver Drill Specifications:
Drill Chuck 1.5 - 13mm
Capacity: Mild Steel 13mm
■ Hitachi's efficient brushless motor works Soft Wood 65mm
Wood Screw 8 x 100mm
approx. 40% more than our conventional Machine Screw 6mm
brushed DC motor per battery charge Battery Voltage 18V
■ 4 stage speed selection No Load Speed :High 0 - 1000/1300/1500/1800/min
■ 13mm single sleeve metal keyless chuck:
Low 0 - 200/300/350/400/min
Max Torque Hard 74Nm
Automatic spindle lock and ratchet lock Max Torque Soft 43Nm
■ Adjustable clutch: 22-stage torque Torque Setting 2 - 8Nm
Overall Length 220mm
■ Compact design - only 206mm long
Weight 2.0kg
■ Built-in white LED light Standard Accessories Side handle, driver bit
Variants
■ DS18DBL/JJ = 2 x 5.0Ah Li-Ion batteries,
UC18YRSL charger, case
■ DS18DBL/JJ1 = 1 x 5.0Ah Li-Ion battery,
UC18YRSL charger, case
■ DS18DBL/W4 = body only
DN18DSL 18V Cordless Angle Drill Specifications:
Drill Chuck 10mm
Head Height 88mm
■ Large paddle switch for more control Centre Height 23mm
Capacity: Mild Steel 10mm
■ Built-in LED light Soft Wood 28mm
■ Remaining battery indicator lamp Wood Screw 5.1 x 38mm
■ Lightweight & compact design (D x L)
Battery Voltage 18V
■ Low centre height of 23mm No Load Speed 0-1800/min
Max Torque (hard) 12Nm
Overall Length 326mm
Weight 1.7kg
Head height Standard Accessories Side handle
88
mm
Variants
Center height
■ DN18DSL/JJ1 = 1 x 5.0Ah Li-Ion battery, UC18YFSL
23
mm
charger, tool bag
DN18DSL/W4 = Body only
WF18DSL 18V Cordless Automatic Specifications: 999054
Drive 6.35mm hex bit shank
Screw Driver Capacity: Screw Size 4mm
■ For collated screw strips Screw Length 25 - 41mm
Loading 50 screws
■ Hitachi's multiple plate friction type silent Battery Voltage 18V
clutch No Load Speed 4,200/min
■ Quick replacement of a driver bit Overall Length 379mm
■ Easy to adjust screw-in depth by knob
Weight 2.1kg
Standard Accessories Driver bit
■ Remaining battery indicator lamp
■ Belt hook
Variants
■ WF18DSL/JW = 2 x 4.0Ah Li-Ion batteries,
UC18YRSL charger, 3 x PH2 bits, 3 x surface
protectors, carrying case
■ WF18DSL/W4 = 3 x PH2 bits, 3 x surface
protectors
Page 13
Cordless Combi Drills
DV18DGL 18V Cordless Impact Driver Specifications:
Drill Chuck 2.0-13mm keyless
Drill Capacity: Brick 13mm
■ Max torque (hard) Mild Steel
Soft Wood
13mm
38mm
55Nm
Wood Screw 8 x 75mm
(D x L)
Machine Screw 6mm
Battery Voltage 18V
No Load Speed: High 0-1400/min
■ Short body length Low 0-350/min
Impact Rate: High 0-19600/min
220mm
Low 0-4900/min
Max Torque Hard 55Nm
Max Torque Soft 23Nm
Torque Setting 1-6Nm
■ 13mm single-sleeve keyless chuck:
Overall Length 220mm
Weight*3 1.7kg
Automatic spindle lock and ratchet lock Standard Accessories*4 Driver bit, carrying case
■ Adjustable clutch: 22 stage torque
■ Slim and soft grip handle
■ Built-in LED light
■ Optional hook
Variants
■ DV18DGL/JF = 2 x 2.5Ah Li-Ion batteries,
UC18YKSL charger, driver bit, case
DV18DSDL 18V Cordless Impact
Driver Drill Specifications: 999054
Drill Chuck 1.5-13mm keyless
Capacity: Brick 16mm
■ High torque design Mild Steel 13mm
Soft Wood 65mm
■ Durable aluminum cover Wood Screw 8 x 100mm
■ Fan-cooled motor and 2 speed gear
(D x L)
■ 13mm keyless chuck Machine Screw 6mm
■ Capacity for brick 14mm and soft wood
Battery Voltage 18V
No Load Speed Hi: 0-1800/min Lo: 0-400/min
50mm Impact Rate Hi: 0-27000/min Lo: 0-6000/min
■ Adjustable clutch: 22 stage torque Max Torque Hard 92Nm
Max Torque Soft 43Nm
■ Belt hook
Torque Setting 2-8Nm
■ LED light on body Overall Length 242mm
■ Remaining battery indicator lamp Weight 2.2kg
Standard Accessories Side handle, driver bit
Variants
■ DV18DSDL/JJ = 2 x 5.0Ah Li-Ion batteries,
UC18YRSL charger, case
■ DV18DSDL/JJ1 = 1 x 5.0Ah Li-Ion battery,
UC18YRSL charger, case
■ DV18DSDL/JF = 2 x 2.5Ah batteries, UC18YRSL
charger, case
■ DV18DSDL/W4 = body only
DV18DBL 18V Cordless Impact Driver Drill Specifications:
Drill Chuck 1.5 - 13mm
with Brushless Motor Capacity: Brick 16mm
■ Hitachi's efficient brushless motor works Mild Steel 13mm
Soft Wood 65mm
approx. 40% more than our conventional Wood Screw 8 x 100mm
brushed DC motor per battery charge Machine Screw 6mm
■ 4 stage speed selection Battery Voltage 18V
■ 13mm single sleeve metal keyless chuck:
No Load Speed :High 0 - 900/1100/1400/1800/min
Low 0 - 200/250/300/400/min
Automatic spindle lock and ratchet lock Impact Rate :High 0 - 27000/min
■ Adjustable clutch: 22-stage torque Low 0 - 6000/min
Max Torque Hard 74Nm
■ Compact design - only 220mm long
Max Torque Soft 43Nm
■ Built-in white LED light Torque Setting 2 - 8Nm
Overall Length 220mm
Weight 2.2kg
Standard Accessories Driver bit
Variants
* Photo shown with BSL1840 ■ DV18DBL/W4 = body only
Page 14
Cordless Combi Drills
DV18DBXL 18V Cordless Combi Drill ■ High performance combi drill with brushless
with Brushless Motor
motor
■ 18V slide Lithium-ion battery BSL1860
(6.0Ah) and fast charger UC18YSL3
■ Charges in only 38 mins
■ High maximum torque of 136Nm (hard)
■ Reactive Force Control (RFC) system
reduces risk of injury from tool overload
■ LED warning system
■ 13mm single sleeve metal keyless chuck
with automatic spindle lock and ratchet lock
■ Adjustable clutch: 22-stage torque
■ Compact 220mm in this class
■ Built-in white LED light
Specifications:
Drill Chuck 1.5-13mm
Capacity: Brick 16mm
Mild Steel 13mm
Soft Wood 76mm
■ Max torque (hard) Wood Screw
(D x L)
10mm x 90mm
136Nm
Machine Screw 6mm
Battery Voltage 18V
No Load Speed :High 0-2100
Low 0-500/min
Impact Rate :High 0-31500/min
Low 0-7500/min
Max Torque Hard 136Nm
Overall Length 204mm
Weight 2.5kg
Standard Accessories Driver bit
Variants
■ DV18DBXL/JX = 2 x 6.0Ah Li-Ion batteries,
UC18YSL3 charger, case
■ DV18DBXL/W4 = Body only
Page 15
Cordless Hammer Drills
DH18DBL 18V Cordless SDS-Plus
Hammer Driver Drill
NEW
■ Impact energy
2.6 Joules Specifications:
Capacity: Concrete
Mild Steel
Wood
26mm
13mm
27mm
Bit Shank SDS-plus
■ Drilling capacity in concrete Battery Voltage
No Load Speed
18V
0-1050/min
26mm
Impact Rate 0-3950/min
Overall Length 390mm
Weight 3.7kg
Standard Accessories Side handle,depth gauge
■ Hitachi's efficient brushless motor works Variants
■ DH18DBL/J4 = body only
approx. 50% more than our conventional ■ DH18DBL/JP = 2 x 5.0Ah Li-Ion batteries
brushed DC motor per battery charge (BSL1850), UC18YFSL charger, case
■ Reactive Force Control (RFC) system reduces
risk of injury from tool overload
■ Constant speed control
■ Over current protection
■ 3 mode action: rotary drilling, hammer drilling or chiseling
■ Built-in LED light
■ Remaining battery indicator
Page 16
Cordless Hammer Drills
DH18DSL 18V Cordless Rotary Hammer Specifications: 999 00
Capacity: Concrete 16mm
Mild Steel 13mm
■ 2-mode action: rotation only mode, rotation Wood 18mm
Bit Shank SDS-plus
and hammering mode Battery Voltage 18V
■ 2-mode power: save mode for small bits and
No Load Speed 0-750/min 0-1500/min
power mode for large bits Impact Rate 0-3,100/min 0-6200/min
■ New design to decrease grease leaks
Impact Energy 1.4 Joules
Overall Length 276mm
■ Slim soft grip handle Weight 2.2kg
■ LED light on body Standard Accessories Side handle,depth gauge, carrying
case
■ Remaining battery indicator lamp
Variants
■ DH18DSL/W4 = body only
■ DH18DSL/JJ = 2 x 5.0Ah Li-Ion batteries
(BSL1850), UC18YRSL charger
■ DH18DSL/JJ1 = 1 x 5.0Ah Li-Ion battery
(BSL1850), UC18YRSL charger
DH24DVC 24V Cordless Rotary Hammer Specifications: 999 00
Capacity: Concrete 20mm
Mild Steel 13mm
■ 3-mode action: rotation only mode, rotation Wood 27mm
Bit Shank SDS-plus
and hammering mode, hammering only mode Battery Voltage 24V
■ Fan-cooled motor with replaceable carbon brush
No Load Speed 0-1250/min
■ Durable cylindrical gear cover Impact Rate 0-5600/min
■ Fast to install bit by one motion
Impact Energy 1.7 Joules
Overall Length 305mm
■ Compact and lightweight Weight 4.1kg
■ Soft grip handle Standard Accessories Side handle, depth gauge, carrying
case
Variants
■ DH24DVC/JK = 2 x Ni-MH batteries
(BSH2420), UC24SGH charger
999090
DH25DAL 25.2V Cordless Rotary Hammer Specifications:
Capacity: Concrete 26mm
Mild Steel 13mm
■ 3-mode action: rotation only mode, rotation Bit Shank SDS-plus
Battery Voltage 25.2V
and hammering mode, hammering only mode No Load Speed 0-550/min 0-1100/min
■ 2-mode power: save mode for small bit and
Impact Rate 0-2250/min 0-4500/min
power mode for large bit Impact Energy 2.8 Joules
■ Fan-cooled motor with replaceable carbon brush
Overall Length 322mm
Weight 3.6kg
■ Durable cylindrical gear cover Standard Accessories Side handle, depth gauge, carrying
■ Fast bit installation by one motion case
■ Soft grip handle
Variants
■ DH25DAL/JL = 2 x 3.0Ah Li-Ion batteries
(BSL2530), UC36YRL charger
■ DH25DAL/JQ = 2 x 2.0Ah Li-Ion batteries
(BSL2520), UC36YRL charger
999090
DH36DAL 36V Cordless Rotary Hammer Specifications:
Capacity: Concrete 26mm
Mild Steel 13mm
■ 3-mode action: rotation only mode, rotation Bit Shank SDS-plus
Battery Voltage 36V
and hammering mode, hammering only No Load Speed 0-550/min 0-1100/min
mode Impact Rate 0-2250/min 0-4500/min
■ 2-mode power: save mode for small bits and Impact Energy 2.8 Joules
Overall Length 322mm
Power mode for large bits Weight 4.0kg
■ Fan-cooled motor with replaceable carbon brush
Standard Accessories Side handle, depth gauge, carrying
■ Durable cylindrical gear cover case
■ Fast bit installation by one motion
■ Soft grip handle
Variants
■ DH36DAL/JL = 2 x 2.6Ah Lithium-ion
battery (BSL3626), UC36YRSL charger
Page 17
Cordless Impact Drivers
WH10DFL2 10.8V Cordless Impact Driver Specifications:
Capacity:Bolt 5-12mm
High Tension Bolt 5-10mm
■ 10.8V and max torque: 95Nm Machine Screw 4-8mm
Drive 6.35mm
■ Slim and soft grip handle Tightening Torque 95Nm
■ LED light on body Battery Voltage 10.8V
■ Charge time 30 mins with UC10SL2 No Load Speed 0-2500/min
Full Load Impact Rate 0-3,000/min
Overall Length 151mm
Weight 1.0kg
Standard Accessories Driver bit, carrying case
Variants
■ WH10DFL2/JL = 2 x 1.5Ah Li-Ion batteries,
UC10SL2 charger, case
WH18DGL 18V Cordless Impact Specifications for WH18DJL:
Capacity: Bolt 6-14mm
Driver High Tension Bolt 6-12mm
■ Tightening torque Drive
Machine Screw 4-8mm
6.35mm hex bit shank
145Nm
Tightening Torque 145Nm
Battery Voltage 18V
No Load Speed 0-2400/min
Full Load Impact Rate 0-3,200/min
Overall Length 166mm
■ Short body length Weight 1.4kg
Standard Accessories Carrying case
160mm
■ Lightweight:
■ Slim and soft grip handle Variants
■ WH18DGL/JF = 2 x 2.5Ah Li-Ion batteries,
■ Built-in LED light
UC10SL2 charger, case
■ WH18DGL/J4 = Body only
WH18DSDL 18V Cordless Impact Driver Specifications: 999054
Capacity: Bolt 6 - 14mm
High Tension Bolt 6-15mm
■ High tightening torque of 170Nm (hard) Machine Screw 4-10mm
Drive 6.35mm (1/4") hex bit shank
■ Power mode for heavy duty work Tightening Torque 170Nm (hard)
Voltage 18V
■ Save mode for smaller jobs (95Nm (hard)) No Load Speed 0-2600/min
Impact Rate 0-3200/min
■ Slimline soft grip handle Overall Length 161mm
■ White LED spotlight Weight 1.7kg
Standard Accessories Carrying case
■ Battery level indicator
■ 6.35mm hex bit holder
Variants
■ Driver bit not included ■ WH18DSDL/JJ = 2 x 5.0Ah Li-Ion batteries,
UC18YRSL charger, case
■ WH18DSDL/JJ1 = 1 x 5.0Ah Li-Ion battery,
UC18YRSL charger, case
■ WH18DSDL/W4 = Body only
WH18DBDL 18V Cordless Impact Driver Specifications:
with Brushless Motor Capacity: Bolt 6-14mm
High Tension Bolt 6-12mm
Max torque: 160Nm (hard)
■ Machine Screw 4-10mm
Hitachi's efficient brushless motor works
■ Drive 6.35mm hex bit shank
Tightening Torque 160Nm
approx. 55% more than our conventional Battery Voltage 18V
brushed DC motor per battery charge No Load Speed 0-900/1400/2000/2600/min
■ 4 stage speed selection Full Load Impact Rate 0-3,200/min
Overall Length 157mm
Selective striking mode (single or continuous) Weight 1.7kg
■ LED light on body Standard Accessories None
■ Remaining battery indicator lamp
Variants
■ WH18DBDL/W4 = Body only
Page 18
Cordless Impact Wrenches
WR18DSDL 18V Cordless Impact Wrench Specifications: 999054
Capacity: Bolt 10-18mm
High Tension Bolt 8-14mm
■ For 12.7mm (1/2") square bit shank Drive 12.7mm (1/2") square bit shank
Tightening Torque:
■ Tightening / loosening torque 255Nm Power mode 255Nm
■ 2-mode power: Save mode or Power mode Save mode 140Nm
Battery Voltage 18V
No Load Speed:
Power mode 0-2600/min
Save mode 0-2000/min
Full Load Impact Rate 0-3,200/min
Overall Length 173mm
Weight 1.7kg
Standard Accessories Carrying case
Variants
■ WR18DSDL/JJ = 2 x 5.0Ah Li-Ion batteries,
UC18YRSL charger, case
■ WR18DSDL/JJ1 = 1 x 5.0Ah Li-Ion battery,
UC18YRSL charger, case
■ WR18DSDL/W4 = Body only
WR18DSHL 18V Cordless Impact Wrench Specifications: 999100
Capacity: Bolt 12-22mm
High Tension Bolt 12-16mm
■ Powerful tightening/loosening torque of
Drive 12.7mm (1/2") square bit shank
480Nm (hard) Tightening Torque 480Nm
■ Forward/reverse rocker switch Battery Voltage 18V
■ LED work light No Load Speed 1500/min
■ 12.7mm (1/2") square bit shank Full Load Impact Rate 2000/min
■ Remaining battery indicator lamp Overall Length 264mm
Weight 3.4kg
Standard Accessories Carrying case
Variants
■ WR18DSHL/JJ = 2 x 5.0Ah Li-Ion batteries,
UC18YRSL charger, case
■ WR18DSHL/JJ1 = 1 x 5.0Ah Li-Ion battery,
UC18YRSL charger, case
■ WR18DSHL/W4 = Body only
WR18DBDL 18V Cordless Impact Wrench Specifications:
with Brushless Motor Capacity: Bolt 10-16mm
High Tension Bolt 8-14mm
■ Tightening/loosening torque 250Nm Drive 12.7mm (1/2") square
■ Hitachi's efficient brushless motor works Tightening Torque 250Nm
Battery Voltage 18V
approx. 50% more than our conventional No Load Speed 0-900/1400/2000/2600/min
brushed DC motor per battery charge Full Load Impact Rate 0-3,200/min
■ Selective 4-stage no load speed adjustment Overall Length 168mm
Weight 1.7kg
(900/1400/2000/2600/min) Standard Accessories None
■ Selective striking mode (single or
continuous)
■ 12.7mm (1/2") square bit shank
Variants
■ WR18DBDL/W4 = Body only
* Photo shown with BSL1840
Page 19
Cordless Angle Grinders
G18DBAL 18V Cordless
Angle Grinder
with Brushless Motor ■Best in class*1 cutting performance
per charge
NEW Up to 50% higher* 2
■ Powerful brushless motor :
Torque
Up to 60% higher* 2
■ Over-current protection
■ Smallest body & grip circumference, most
lightweight in its class*3
Specifications for G18DBAL
Capacity: Wheel Dia. 115mm
Hole Dia. 22.2mm
Spindle Thread M14 x 2
Voltage 18V
G18DBAL No Load Speed 9000/min
AUTO mode : 5500/min
Overall Length 326mm
Weight 2.4kg
Standard Accessories Depressed centre wheel, side handle
(vibration-absorbing type), wrench,
carrying case
*1. As of November 2014. Among 14.4V/18V cordless angle
■ AUTO Mode function reduces noise and grinders made by leading power tool manufactures (surveyed
by Hitachi Koki)
vibration in no-load operation *2. A comparison between the model G18DBAL and the previous
model G18DSL
*3. As of November 2014. Among 14.4V/18V cordless angle
grinders with brushless motors made by leading power tool
manufactures (surveyed by Hitachi Koki)
Variants
■ G18DBAL/JJ = 2 x 5.0Ah Li-Ion batteries,
UC18YRSL charger, case
■ G18DBAL/W4 = Body only
■ Dust and water-resistant construction that
remarkably increases durability
Filter
(Image)
■ Electronic control: kickback protection system,
anti-restart protection and soft start
■ Paddle switch
G18DSL 18V Cordless Angle Grinder Specifications: 999054
Capacity: Wheel Dia 115mm
Hole Dia 22.23mm
■ Compact and lightweight Spindle Thread M14 x 2
Voltage 18V
■ High capacity 5.0Ah Lithium-ion battery No Load Speed 9100/min
■ Includes BSL1850 (5.0Ah) batteries and
Overall Length 296mm
UC18YRSL charger Weight 1.8kg
Standard Accessories Depressed centre wheel, wrench,
Charging time: approx. 75 min carrying case
■ Wheel dia 115mm
■ Slim and soft grip perimeter 182mm
■ Slide switch
Variants
■ Replaceable carbon brush for longer service life
■ G18DSL/JJ = 2 x 5.0Ah Li-Ion batteries,
■ Remaining battery indicator lamp
UC18YRSL charger, case
■ G18DSL/JJ1 = 1 x 5.0Ah Li-Ion battery,
UC18YRSL charger, case
■ G18DSL/W4 = Body only
Page 20
Page 21
Cordless Multi Tool
CV18DBL 18V Cordless Multi Tool with Specifications for CV 18DBL:
Battery Voltage 18V
Brushless Motor Oscillation Frequency:
■ Hitachi's original Standard Mode
(Dial1-5)
6000-20000/min
NEW
Easy toolless AUTO Mode
(Dial A)
Oscillation Angle
15000-20000/min
3.2°
accessory change Overall Length
Weight*3
Standard Accessories*4
307mm
2.0kg
Pad (MU93D), sanding papers, blades,
tool box, carrying case
■Vibration and noise are reduced
in no-load operation through
AUTO Mode function Variants
■ CV18DBL/JJ1 = 1 x 5.0Ah battery,
■ 37 types of optional accessories UC18YRSL charger, tool box, carrying case
■ Extended runtime per charge ■ CV18DBL/W4 = Body only
Approx. 44min for CV18DBL with BSL1850
■ Short in overall length: 307mm with BSL1850
■ Small grip circumference
■ Built-in LED light
All-rounders with versatility!
37 types of accessories are available
for various applications including
flush cutting, plunge cutting,
scraping and sanding.
Flush cutting of door jambs Plunge cutting in plasterboard Cutting copper (metal) pipes*5 Flush cutting of screws/nails*5 Routing joints on tiles
Cutting tiles Coarse-sanding of wood Removing mortar/adhesive Removing sealants Removing caulk/sealants
Sanding wood Cutting polystyrene Cutting soft plastics Corner cutting Cutting carpets
Photo: Sanding plate (MU93D) + Sanding paper
*5. These blades may not be sufficient to cut certain materials such as thick copper (metal) pipes or quenched nails.
Page 22
Multi Tool Accessories
Accessories for Multi Tools
Color Code Wood Inox/Stainless steel FRP
Wood Metal Abrasive
by Workpiece Metal Metal Plastic Example:
MM20PB
(for metal)
Multi Tool Blade
piece
piece
Work
Work
Blade Type No. Width A Length B Thickness Picture Application Code No. Blade Type No. Width A Length B Thickness Picture Application Code No.
(mm) (mm) (mm) No. (mm) (mm) (mm) No.
MW85S MU65SBF
A A 65 Cutting FRP, soft plastics
85 Edge cutting of wood 782139 and sheet metal 782177
Titanium-coated edge
(up to 1mm thickness)
MW10P MU85SBF
A Cutting FRP, soft plastics
B Plunge cutting in softwood 85
10 30 782131 and sheet metal 782178
A Plunge cutting in plasterboard
Titanium-coated edge
(up to 1mm thickness)
MW20P MU65CF
65 Cutting FRP, soft plastics
B Plunge cutting in softwood
20 30 782132 A
and sheet metal 782179
A Plunge cutting in plasterboard
Titanium-coated edge
(up to 1mm thickness)
MW32P MU85CF
B 85 Cutting FRP, soft plastics
Plunge cutting in softwood
WOOD
A
32 40 782133 A and sheet metal 782180
Plunge cutting in plasterboard (up to 1mm thickness)
Titanium-coated edge
FRP & Plastic
MW32PC 32 40 MU100SK
B Plunge cutting in softwood A 100 Cutting carpets, rubber and PVC
Curved edge 782134 782175
A for less slipping and Plunge cutting in plasterboard
easy positioning Sharp edge
MW32PB MU100SKS
B A 100 Cutting extruded polystyrene
32 40 Plunge cutting in hardwood foam, rubber, polystyrene and
A Cutting laminated panels
782135 782176
Wave edge
insulation materials
Material : Bi-Metal
MW32PBC 32 40 MU28PK
B Plunge cutting in hardwood B 28 50 Cutting and removing caulk
Curved edge 782136 782171
A for less slipping and Cutting laminated panels A
Material : Bi-Metal
easy positioning Sharp edge
MW65PB MU28PKS
B Cutting polystyrene
Plunge cutting in hardwood B 28 50
65 40 782138 and insulation materials 782172
A and Oriented Strand Board A
Cutting and removing caulk
Material : Bi-Metal Wave edge
MD85SB MU52PKR
A Removing hard adhesive
Edge cutting of wood B 52 26 0.8
85 782124 residues 782173
Cutting nails and copper pipes A
(Rigid scraper)
Material : Bi-Metal Sharp edge
MD100SB MU52PK
A B 52 45 0.4 Removing caulk
Deep edge cutting Removing paint residues
100 782125 782174
Cutting nails and copper pipes A
(Flexible scraper)
Material : Bi-Metal Sharp edge
Wood & Metal
MD28PB MA65SH
B A 65 1.6 Cutting FRP
28 50 Plunge cutting in wood 782121 Cutting hard plastics 782153
A Cutting nails and copper pipes
Tooth material : HM/TC
Routing extra-thin joints on wall tiles
Material : Bi-Metal
MD32PBC 32 50 MA85SH
B Plunge cutting A 85 2.0
A
Curved edge in hard flooring/hard plastics 782122 Routing joints on ceramic tiles 782154
for less slipping and
easy positioning Cutting aluminium Tooth material : HM/TC
Material : Bi-Metal
MD65PB MA85SHT
B Plunge cutting in wood A 85 4.0
65 40 Edge cutting of wood 782123 Routing wide joints on ceramic tiles 782155
A
Cutting nails and copper pipes Tooth material : HM/TC
Material : Bi-Metal
MM10PB MA85SD
Abrasive
A 85 2.0 Cutting FRP
B Flush cutting of nails
A
10 20 782111 Cutting ceramic tiles 782156
and copper pipes
Tooth material : Diamond-RIFF
Routing grooves in ALC
Material : Bi-Metal
MM20PB MA20PH Cutting FRP
20 20 1.6
Metal
B Flush cutting of nails B
Routing joints on tiles
A 20 20 782112 782151
and copper pipes A Plunge cutting
Material : Bi-Metal Tooth material : HM/TC
MM32PB MA32PH Cutting FRP
B Flush cutting of nails B 32 30 2.0
32 30 782113 Routing joints on tiles 782152
A and copper pipes A Plunge cutting
Tooth material : HM/TC
Material : Bi-Metal
MI20P MA70DHX Routing joints on tiles with the edge
Inox/Stainless Steel & Metal
Cutting metals A 70
B 20 30 and removing mortar or adhesive
A
including inox/stainless steel, 782101 782158
with the base when replacing tiles.
Tooth material : HM/TC screws and nails. Tooth material : HM/TC (Available for corner cutting)
MI32P MA78DH
B 32 40 Cutting metals A A
including inox/stainless steel, Coarse-sanding of wood
782102 78 782157
A screws and nails. Removing mortar or adhesive
Tooth material : HM/TC Back side Front side
MU93D
Diameter mm Grit Type Grit No. Cord No. A Multi Tool Pad used with a sand paper
Sanding Paper 93 for sanding wood/metal, removing
#40 338251 782191
rust /paint and finish -sanding
#60 338252
#80 338253
94 AA #100 338254 Tool Box
#120 338255 Code No. 337685
#150 338256
#180 338257
#240 338258
Page 23
Cordles Stud Cutters/Circular Saws
CL14DSL 14.4V Cordless Stud Cutter Specifications:
Capacity:
Threaded Stud Size M10, M8, M6 or W3/8"
■ Designed for threaded stud cutting Battery Voltage 14.4V
■ Cutting speed of threaded studs: 2.3 sec.
No Load Speed (Stroke) 30/min
Overall Length 277mm
■ Clean cutting without sparks, chips and
Weight 2.9kg
noise Standard Accessories M10 cutter set, M10 trimmer, wrench,
■ Easily replaceable cutters have 4 cutting
carrying case, hook
edges each
Variants
■ CL14DSL/JL = 2 x 3.0Ah Li-Ion batteries,
UC18YRSL charger, case
Size M10 M8 M6
Cutter Set 308565 308564 308563
Trimmer 308570 308569 308568
CL18DSL 18V Cordless Stud Cutter Specifications:
Capacity:
Threaded Stud Size W3/8, W5/16, M10, M8, M6
■ Designed for threaded stud cutting Battery Voltage 18V
■ Cutting of threaded studs: 2.3 sec.
No Load Speed 30/min
Overall Length 283mm
■ Clean cutting without sparks, chips and noise
Weight 3.2kg
■ Various cutters available: W3/8, W5/16, Standard Accessories M10 cutter set, M10 trimmer, wrench,
carrying case
M10, M8, M6
Variants
■ CL18DSL/JW = 2 x 4.0Ah Li-Ion batteries,
UC18YRSL charger, case
Size M10 M8 M6 CL18DSL/W4 = Body only
Cutter Set 308565 308564 308563
Trimmer 308570 308569 308568
C18DBAL 18V Cordless Circular Saw
with Brushless Motor
NEW ■ Extended max cutting depth of
66mm
■ Runtime per charge
Up to 60% longer *1*2
■ Cutting speed per minute
Up to 90% faster *1*2
■ Most compact and most lightweight in its
class*3
■ Balanced weight distribution to keep the tool
body horizontal.
■ Flat motor housing design increases stability
when changing blades
Specifications:
Capacity: Blade Dia. 165mm
Max Cut Depth 90°: 66mm
45°: 45mm
Bore Size 20mm
Voltage 18V
No Load Speed:Power Mode 4100/min
Soft Material Silent Mode 2500/min
Overall Length 294mm
Weight 3.2kg
■ Silent mode improves motor efficiency while Standard Accessories Blade, wrench
lowering the noise.
■ Overload protection
*1.In comparison with the previous model C18DSL with BSL1850
■ Soft start (5.0Ah)
■ Optional fluorine plate for faster speed *2.Operating conditions: American pine (50mm in thickness,
300mm in width), 2kg of thrust power
■ Cutting depth adjustment system *3.As of March 2015. Among 165mm cordless circular saws
■ -5 degrees bevel cutting made by leading power tool manufactures (surveyed by
Hitachi Koki)
■ Parallel adjustment system
■ Blower function Variants
■ High-intensity twin LED lights ■ C18DBAL/JP = 2 x 5.0Ah Li-Ion batteries,
■ Backward saw dust exhaust UC18YRSL charger, case
■ Remaining battery indicator ■ C18DBAL/W4 = Body only
Page 24